Calibre 1518 https://www.fpjourne.com/en/collection/linesport-collection/chronographe-rattrapante FP Journe https://www.fpjourne.com/en FP Journe
Diameter: 44 mm
Overall height: 12.1 mm
Dial: anthracite, in Aluminium alloy with luminescent numerals, counters in sapphire
Hands: big luminescent hands in Steel, mate rhodium plated Steel, ivory coloured Steel and small hands in red lacquered Titanium

Diameter: 44 mm
Overall height: 12.1 mm
Dial: anthracite, in Aluminium alloy with luminescent numerals, counters in sapphire
Hands: big luminescent hands in Steel, mate rhodium plated Steel, ivory coloured Steel and small hands in red lacquered Titanium
Technical Specifications
In 18 K rose Gold for the Platinum PT 950 or 18 K 6N Gold models / In Aluminium alloy for the Titanium grade 5 model
Mechanical with manual winding
38 turns of crown
Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mm
In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°
Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4h
80 ± 2 hours without the chronograph
0h dial up: 300°
24h dial up: 260°
Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
Movement without dial: 285
Cased up with strap: 479
Jewel: 29
Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.

Diameter: 44 mm
Overall height: 12.1 mm
Dial: Silver guilloché dial covered with Ruthenium, matte 18K 6N Gold appliqué numerals, counters in whitened guilloché Silver
Hands: mate 5N gilt Steel, ivory coloured Steel and blued Steel
Technical Specifications
In 18 K rose Gold for the Platinum PT 950 or 18 K 6N Gold models / In Aluminium alloy for the Titanium grade 5 model
Mechanical with manual winding
38 turns of crown
Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mm
In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°
Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4h
80 ± 2 hours without the chronograph
0h dial up: 300°
24h dial up: 260°
Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
Movement without dial: 285
Cased up with strap: 479
Jewel: 29
Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.

Diameter: 44 mm
Overall height: 12.1 mm
Dial: Silver guilloché dial in blue-mauve colour, matte 18K white Gold appliqué numerals, seconds counter in whitened guilloché Silver
Hands: mate rhodium plated Steel , ivory coloured Steel and blued Steel
Technical Specifications
In 18 K rose Gold for the Platinum PT 950 or 18 K 6N Gold models / In Aluminium alloy for the Titanium grade 5 model
Mechanical with manual winding
38 turns of crown
Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mm
In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°
Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4h
80 ± 2 hours without the chronograph
0h dial up: 300°
24h dial up: 260°
Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
Movement without dial: 285
Cased up with strap: 479
Jewel: 29
Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.
About
THE CASE OF 44 MM DIAMETER AND 12.1 MM THICK ENCLOSES THE MONOPOUSSOIR SPLIT SECOND CHRONOGRAPH MOVEMENT WITH A VERY LARGE DATE, MADE IN ALUMINIUM ALLOY FOR THE TITANIUM VERSION AND IN 18K ROSE GOLD FOR THE 18K 6N GOLD AND PLATINUM VERSIONS.
THIS CHRONOGRAPH FEATURES A POWER RESERVE OF 80 HOURS MAKING IT POSSIBLE TO EFFICIENTLY USE THE CHRONOGRAPH WITH THE RATTRAPANTE FUNCTION AFTER 2 DAYS AND A VERY LARGE DATE IN A WINDOW OF 5.20 X 2.80 MM PROVIDES AN INCREASED READABILITY. THE TACHYMETRIC BEZEL INLAID WITH CERAMIC AND THE NEW TYPOGRAPHIC NUMERAL ARE A REMINDER OF THE 2017 ONLY WATCH TIMEPIECE.
FOR EACH OF THE 3 VERSIONS, A DIAL OF A DIFFERENT COLOUR:
- FOR THE TITANIUM MODEL, A DIAL IN ALUMINUM ALLOY OF ANTHRACITE COLOUR WITH APPLIQUES NUMERALS WITH SUPERLUMINOVA, 2 CHRONOGRAPH COUNTERS IN ENGRAVED SAPPHIRE AND HANDS WITH SUPERLUMINOVA.
- FOR THE 6N GOLD MODEL, A SILVER GUILLOCHE DIAL COVERED WITH RUTHENIUM AND APPLIQUES NUMERALS IN MATTE 6N GOLD, 2 SILVER CHRONOGRAPH COUNTERS AND MATTE 5N GOLDEN HANDS.
- FOR THE PLATINUM MODEL, A BLUE-MAUVE COLOUR SILVER GUILLOCHE DIAL WITH APPLIQUES NUMERALS IN MATTE WHITE GOLD, 2 SILVER CHRONOGRAPH COUNTERS AND MATTE RHODIED HANDS.
THE PRECIOUS METAL BRACELETS ARE ASSORTED TO THEIR RESPECTIVE CASE. TWO NEW BRACELETS IN 18k 6N GOLD AND PLATINUM WITH MATTE HAMMERED FINISHING HAVE BEEN DEVELOPED. THE LINKS ATTACHED TO THE CASE ARE ALSO ARTICULATED TO ADAPT TO THE DIFFERENT WRIST SIZES WITH AN ADJUSTABLE FOLDING CLASP IN LENGTH OF APPROXIMATELY 5 MM.
A CROWN WITH 3 POSITIONS:
- POSITION 1: WINDING.
- POSITION 2: CORRECTION OF THE VERY LARGE DATE.
- POSITION 3: TIME SETTING.
THE PUSHER ARE MADE IN THE SAME METAL AS THE CASE:- A PUSHER AT 2H FOR THE CHRONOGRAPH START, STOP AND BACK TO ZERO FUNCTIONS.
- A PUSHER AT 4H FOR THE RATTRAPANTE.
THIS CALIBRE 1518 WITH MANUAL WINDING, CONCEIVED BY F.P.JOURNE, IS AS USUAL ENTIRELY MADE IN OUR MANUFACTURE AND ASSEMBLED BY ONE OF OUR WATCHMAKERS. F.P.JOURNE PERPETUATES THE WATCHMAKING TRADITION AND MAINTAINS EXCLUSIVE CRAFTSMANSHIP SINCE EVERY EXPERIENCED WATCHMAKER PERFORMS ALL THE ASSEMBLY STAGES FROM BEGINNING TO END, A UNIQUE CASE IN THE PROFESSION.
INSPIRED BY THE CHRONOGRAPH MADE FOR ONLY WATCH 2017, THIS NEW MOVEMENT FEATURES A CHRONOGRAPH DIRECT GEARING WITH A ROCKING PINION AVOIDING THE JUMP OF THE HAND AT THE START. AN IMPORTANT DEVELOPMENT WAS REQUIRED TO INTEGRATE THE VERY LARGE DATE IN A TOTAL HEIGHT OF ONLY 6.80 MM, SIGNATURE OF THE F.P.JOURNE BRAND. THE MAGNIFICENT FINISHING AND DECORATIONS OF THE MOVEMENT VISIBLE THROUGH A TRANSPARENT SAPPHIRE BACK ARE ONE OF THE NUMEROUS UNDISPUTABLE QUALITIES OF THE F.P.JOURNE HAUTE HOROLOGY.
Technical Specifications
In 18 K rose Gold for the Platinum PT 950 or 18 K 6N Gold models / In Aluminium alloy for the Titanium grade 5 model
Mechanical with manual winding
38 turns of crown
Overall diameter: 33.60 mm
Casing-up diameter: 33.20 mm
Overall height: 6.80 mm
Height of hands: 2.20 mm
Diameter of stem thread: S1.20 mm
In-line lever escapement, 15-tooth escape wheel
Chronometric with four adjustable inertia weights
Anachron balance spring
Mobile stud holders
Free-sprung balance
Nivatronic laser-welded to collet
Pinned GE stud
Frequency: 21,600 v/h (3Hz)
Inertia: 10.10 mg*cm2
Angle of lift: 52°
Crown with 3 positions
Position 1: winding
Position 2: correction of the date
Position 3: time setting
Pusher chronograph to start, stop and back to zero at 2h
Pusher split-second at 4h
80 ± 2 hours without the chronograph
0h dial up: 300°
24h dial up: 260°
Circular stripes on the bridges, circular graining on the baseplate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work
Movement without dial: 285
Cased up with strap: 479
Jewel: 29
Technical description
The calibre 1518 with manual winding, conceived by F.P.Journe, is as usual entirely made in our Manufacture and assembled by one of our watchmakers. F.P.Journe perpetuates the watchmaking tradition and maintains exclusive craftsmanship since every experienced watchmaker performs all the assembly stages from beginning to end, a unique case in the profession.
Inspired by the Chronograph made for Only Watch 2017, this new movement features a chronograph direct gearing with a rocking pinion avoiding the jump of the hand at the start. An important development was required to integrate the very large date in a total height of only 6.80 mm, signature of the F.P.Journe brand.
The magnificent finishing and decorations of the movement visible through a transparent sapphire back are one of the numerous undisputable qualities of the F.P.Journe Haute Horology.